Search results

Looking at the schedule, I don't see it on the schedule. Is one planned, when, where??

Does anyone have any recent ballpark prices or experience on arrive and drive car rental fees............regional level cars OK? Interested in rates for SM, IT cars of various types, SRF, FV, CFF, anything else that is reliable on the track. Also, what kind of "breakage", "crash", etc...

Corvette guru's out there. Where would a person go/lurk to look for a nice used Z06....maybe 3 or so years old? Thanks, Jay

Just doing some reading and wondered......is there any of crude rule of thumb that suggests what % less torque is indicated using the closed loop integral control valve acceleration method (say 1000 rpm/sec) compared to old school static methods that we have all used. I realize this can change...

Looking for a local source for one of these or similar. https://www.pegasusautoracing.com/produ ... RecID=9749 Maybe there is a street car that uses one so I can direct my local NAPA or other parts guy. Looking for a PN and source. Turns out Miatas aren't plumbed to give a good heads up...

The iphone 4s has 2 cameras pointing in opposite directions. Does anyone know if it is possible to simultaeously record fore and aft? If mounted mid windshield it could be great protest evidence. Can anyone tell me if it is possible with or without an add on application? It would seem to be...

I have an application for a high performance street car where this (3072-10) sperical bearing is used on the rear hub outboard control arm. The bottom lower control arm PN is 3070-12. https://www.pegasusautoracing.com/produ ... oduct=3072 . I wondered if anyone has seen and can direct me...

Any advice from anyone who has tried it? I'm planning to watch some videos and check out a flight manual. Already rigged up my POV hat-cam! If you've done it.....any advice? Robinson R22 Thanks, Jay

Here's a link to a CA engineer who is scratch building a rear engined "Lotus 7" called the Midlana.....I guess it will be a track car. Unbelievable craftsmanship. Click on the "build diary" to admire his work and wish you were as skilled. ;^) http://www.midlana.com/

Who has experience with these type of products? Is it fairly straightforward to get everything all synched up in the absence of a GPS based camera or DAQ. I am aware of this product but no others. http://www.racerender.com/RR2/Features.html Here's the hardware I have...

For those folks with HANS devices older than 5 years (like mine) no need to get a recert yet. Finally something that is logical and makes sense. http://scca.cdn.racersites.com/prod/assets/RM_11-10.pdf

http://vimeo.com/aimsports/videos This is why I'm so glad I bought my system from AIM....the support NEVER stops and keeps getting better and better and better. By accident I found this site which walks you through a few tricks inside the AIM RaceStudio 2 analysis software. 15 videos so far...

If anyone needs pro help who is familiar with all popular DAQ systems a shared opening has come up next Mon, Tues, Wed of Runoffs week at RA. Cost is $500 including all expenses.......John WILL help you go faster. His name is John Block at 800-647-2392 . John holds DAQ training sessions at his...

Not being very familiar with 2 strokes I thought I'd ask some experts: What symptoms would I expect to see from a semi blocked exhaust port? I'd expect low power but what about idling quality, throttle pickup, need for choke or not, vacuum generation in intake manifold, starting ability...

Does anyone know what kind of cars typically use springs with this ID? It's a real motorsports application since Eibach lists them in their motorsports catalog. Typical coil over springs are 2.5" ID.

Ron, I can't locate my Machinery's Handbook........can you see if you can find anything on a straight steering shaft spline as follows: 31 teeth for the whole circumberence, OD is .532" ......could be metric but this is 13.5mm. Shaft could have been designed in Japan in about 1979. You da...

Does anyone have a link to the entry information? Thanks, Jay

Does anyone have any experience with this....$120!! How about syncing to a data system. I have a Mychron 3 XG log. http://ped-products.com/index.php?dispa ... uct_id=121

I conned my local library here in Indy into buying a copy (wanted to see it before I buy my own). It just came in so once I get through it I'll report on the quality. The standard may still be Buddy Fey's "Data Power". It's out of print and copies trade for silly $$. Thanks, Jay

I tried to call Dayle Frame but, God forbid, he seems to actually be working today. Tough life. Anyway, I have a small piece of cast aluminum (12"x6"x1", not sure of alloy but likely not A356.....super soft and almost feels like 1100) that has heavy baked on gummy oil residue....years and...