Search results

I need your help. I have a Tilton aluminum flywheel for my 1275 LP engine that's uses a 5.5 inch clutch .The hardened insert for the clutch sets in a recess in the flywheel and is located with the clutch attachment bolts. Does anyone know where I can get a new hardened insert. Kerry Foote

Hello all. I just purchased a pair of upgraded spindles from Winners Circle and would like to know if anyone can tell me the Timken bearing numbers to use with these spindles? I understand there may be a difference in the radius on the inner bearing that could cause a problem by not correctly...

I've finally cut out and welded the rear fenders on my HP Sprite so I could lower it more. Measuring at the pinch seam under the rocker my first adjustment has the rear at 2 1/4 and the front at 2inches. I was wondering how this compares to some of the other prod Spridgets out there. Thanks

Can anyone tell me where in the GCR I can find the weight penalties for non stock dampers. I see where the subject of alternate gear engagement is laid out but I cannot find anything about prep 1 suspension with a prep 2 engine. Thank

I am thinking of purchasing a set of World Wide Imports adjustable lever dampers for my HP sprite. Over the many years of racing my Sprite I have found the fluid viscosity that works for me. But, I am thinking that I may be leaving something on the table. Can anyone help me with some fedback on...

I'm planning the build of my 1275 lp engine and started to think about crankshaft prep. I am starting with a std./std. crank and will be having it turned to .010/.010 to set the proper clearances. Is nitriding necessary and if so who can do it. Thanks

I'm using the early Electromotive ignition on my Sprite and am having a loss of fire to the plugs. Does anyone know of a way to test the crank sensor? Thanks

Anybody have any experience or information about Nural pistons. I found them while researching pistons for LP engine . Price is resnable but? Here's a link.http://empirebritishcarparts.com/SPRITE ... p2326.html

I'm sure that this was answered some time ago, could somebody please re-submit what the numbers on the nose of a De Long cam mean? Thsnk you.

Just putting the oil in the rear end of my sprite for Sebring next week and I was wondering if anybody has tried NOT filling it till the oil runs out the sight hole. It measures about a quart at that point. If not what amount due you use. I have tried to seal thd axles to keep the oil from the...

Has anyone ever made their own sway bar? Bought a piece of mild steel round stock and heated and bent it to fit. If so, what procedure used and any problems incurred?

Doing the MGB caliper/ Spitfire rotor (big brakes) on my Sprite and I need to know what size master cylinders to use. Thanks for the help.

Well it's time to do the conversion to big brakes(MGB calipers & Spitfire rtrs) on my HP sprite. Is anyone willing to share the manufacturer and pad material they are using with four wheel disc brakes on a spridget? Thanks for any help.

Just looking for some opinions. On a spridget when you have 4 wheel dics brakes do you run the same compound front and rear or mix it up?

Anybody care to divulge the camshaft numbers they have found to work in a LP 1275. Thanks.....Kerry